The relays on the charging piles serve as the switching center for power control of the charging piles. The good operation of the relays can effectively increase the usage time of the charging piles. Relying solely on the relay for on-off control without considering special circumstances may shorten the lifespan of the charging piles. Adjusting the operation control logic of the relays can effectively reduce equipment wear and significantly extend the lifespan of the charging piles.

Frequent switching of the relays, as well as the high temperature generated by the arc during this process, are the main causes of poor contact. Damage. When the charging piles are powered off, the instantaneous arc often causes the relay contacts to oxidize or weld. By allowing the relays to complete the switching operation under low load conditions to reduce losses. For example, at the end of charging, the pulse width modulation (PWM) can be reduced to make the relays disconnect at a low current. This software operation mode can reduce contact wear.
The operating temperature of the relays also directly determines their usage time. The enclosed environment inside the charging piles is prone to heat accumulation. When the temperature exceeds 105°C, the oxidation of the relay contacts will accelerate. Adjusting the operating voltage and power of the relay can effectively reduce energy consumption. After the activation stage is completed, a voltage reduction circuit is used to maintain the relay’s energy consumption at 60%.

This not only reduces energy consumption but also prevents the relay coil from losing its activated state due to temperature rise, thereby reducing the frequency of switching and extending the usage time of the charging piles.
The normal operation of the relay on the charging piles ensures low energy consumption to control the operating temperature. We can reduce the wear of the relay itself and the maintenance costs caused by relay failures.