1. What is a Portable mode 2 AC Home Charger?
A portable AC home charger is a small charger that is easy to take by side. It is usually configured with 3.5kw/7kw power, and 11kw/22kw are all available at the moment.
It is configured with a 5m cable length. Of course, if you would like to expand the length, it can also be the length you like,
the recommended strength is not more than 10m, otherwise, otherwise, an alarm will occur due to voltage fluctuations due to excessive cable length.
One side can be TYPE1, TYPE2, GBT connector, and another side can match each country’s standard plug,
such as Schuko plug, 3 pins/5 pins CEE industrial plug, UK plug, Germany plug, etc.
- The most significant point is the output current can be adjusted, you can set up the output current by pressing the button on the charger to 8A,10A,16A, or 32A.
- The IP protection grade is IP65, so you do not need to worry about the waterproof and dust-proof function.
- It is configured with an A+DC6mA residual current device, this kind of RCD provides a high-grade protection function.
- The cable material is TPU, which is better than TPE.
- It is configured with a 0.96-inch LCD non-touch screen, you can see the status on the screen also.
2. Specification of Portable mode 2 AC Home Charger
| Rated current | 16A/32A |
| Output Power | 3.6kW/7.4kW |
| Protective function | A +dc 6 mA RCD, overvoltage, overcurrent, overtemperature, CP abnormality, relay adhesion, etc. |
| Operating Voltage | GB/T standard 220V, Type 1standard 240V; Type2 standard 230V |
| Operating temperature | -30°C-+50°C |
| Current regulation | 8A,10A,16A, 32A adjustable |
| An appointment to charge | Yes |
| Display | 0.96 inch OLED |
| Indicator light | RGB multicolor |
| Anti-collision | Yes |
| Anti-UV | Yes |
| Protection level | Ip65 protection level |
| Terminal material | Copper alloy |
| Shell material | Thermoplastic materials |
| Cable material | TPE/TPU |
| Cable length | 5 meters or customized |
| Net weight | 2.0~3.0kg |
| Optional plug types | NEMA 10-50P, Schuko, Central and Eastern Europe plug China standard 3 PIN, etc. |
| Warranty | 24 Months /10,000 times plugin and unplug |
3. LED Status indication of Portable mode 2 AC Home charger
4. What contents on the LED of the Portable mode 2 AC Home charger?
5. What is the meaning of the error code of the Portable mode 2 AC Home charger?
| Serial number | Error code | Content |
| 1 | 0x10 | Over temperature protection |
| 2 | 0x20 | Grounding abnormality |
| 3 | 0x30 | Relay adhesion |
| 4 | 0x40 | RCD leakage exceeds the standard |
| 5 | 0x50 | Car not ready (S2) |
| 6 | 0x60 | Abnormal cp |
| 7 | 0x70 | Small current ( <1A) |
| 8 | 0x80 | Overcurrent protection |
| 9 | 0x90 | Overvoltage protection |
| 10 | 0xA0 | Under voltage protection |
| If there is no hardware failure, draw the gun to clear the failure(1-4 is hardware failure) | ||
6. How to operate the charging process of Portable mode 2 AC Home charger?
1) Insert the 16 A/32A plug of this product into the corresponding socket. The charging pile in Mode 2 is powered on, the indicator light bar lights up (green breathing light), and
the screen displays the corresponding operation.
2) If no function settings are required, please connect the charging connector,
and the yellow indicator light will always be on. After inserting the gun, wait for the vehicle
to be ready (the S2 switch is closed).
3)The connection is normal, the charging starts, and the green running water light is on. The screen displays the corresponding information.
4) When charging is completed, the green light is always on.
Note: This product has an automatic power-off function when fully charged (current < 1A ).
1) if no function settings are required, please connect the charging connector, and the yellow indicator light will always be on. After inserting the gun, wait for the vehicle to
be ready(S2 switch is closed).
- The connection is normal, the charging starts, and the green running water light is on. The screen displays the corresponding information.
3)When charging is completed, the green light is always on.
7. How to set up the maximum current of the Portable mode 2 AC Home charger?
- Insert the 16 A/32Aplug of this product into the corresponding socket, the mode 2 charging pile is powered on,
the indicator light is on (green breathing light), and the screen is on. Press and hold SET(5 seconds) to enter the setting interface, then release SET.
- Short press SET to select the current mode(Current), then press and hold SET (2 seconds) to enter the current setting interface.
Short press SET to switch the maximum current. After completing the setting,
there is no key operation within 3 seconds to return to the main setting interface. If there is no button operation within 6 seconds,
it will automatically exit and save, and the setting will be completed.
- Insert the gun into normal charging mode.
Note: Do not insert the gun during setup.
*This product has a memory function and only needs to set the adaptation current when it is used for the first time. If the charging conditions change, please reset the maximum current.
8. How to set up the timer of the Portable mode 2 AC Home charger?
- Insert the 16 A/32Aplug of this product into the corresponding socket, the mode 2 charging pile is powered on, the indicator light is on (green breathing light), and the screen is on. Long press (5 seconds) SET to enter the setting interface, then release SET.
- Short press SET to select the time mode(Time), then press and hold SET (2 seconds) to enter the time setting interface. If the hour is flashing, short press SET to switch the hour; if you need to set minutes, press and hold SET (2 seconds) until the minute is flashing, then short press SET to switch the minute. After completing the setting, if there is no key operation within 3 seconds, you will return to the main setting interface. If there is no key operation within 6 seconds, it will automatically exit and save, completing the setting. The screen displays the reservation time, and charging starts when the reservation time is reached (if not in the reservation time interface, short press SET(2 seconds) to set the reservation charging, and also press SET (2 seconds) to cancel the reservation).
Note: Do not insert the gun during setup. After setting up insert the gun.
*This product has a memory function, you only need to set the appointment time when you use it for the first time. If the charging conditions change, please reset the scheduled time.
*To cancel the reserved charging after making the reservation, just follow the above steps to cancel the reserved charging.
*After the scheduled charging function is turned on, if you want to plug in and charge at the same time, just cancel the scheduled charging according to the above steps.
9. How to cancel the grounding instruction of the Portable mode 2 AC Home charger?
1) Insert the 16 A/32A plug of this product into the corresponding socket, the mode 2 charging pile is powered on,
the indicator light is on (red is always on), and the screen displays the fault code:0X20.Press and hold SET (5 seconds) to enter the setting interface, then release SET.
2)Short press SET to select grounding mode (Grounding) then press and hold SET (2 seconds) to enter the grounding setting interface.
Short press SET to select NO. After completing the setting, no key operation is performed within 3 seconds to return to the main setting interface,
if there is no button operation within 6 seconds, it will automatically exit and save, and the setting will be completed.
Note: Do not insert the gun during setup. After setting up, insert the gun.
*Canceling the grounding function may bring potential safety hazards, please choose carefully and bear the consequences at your own risk!
*Does not have a memory function, power-on default: Yes.
10. Special instructions for Portable mode 2 AC Home charger
This product has the functions of grounding detection and A+ dc 6mA leakage detection, please connect the incoming power supply correctly.