Voltage fluctuations on the input (grid) side of charging piles are a common cause of charging piles failing to charge normally, frequently reporting errors, or experiencing “gun tripping.” The causes can mainly be attributed to four dimensions: grid power supply, line transmission, internal hardware of the charging pile, and environmental interference.

Grid Power Supply Side Causes (External Factors)
- Grid Fluctuations: Unstable grid power supply, such as insufficient power generation, transmission and distribution system failures, or intermittent grid connection of new energy sources (photovoltaics, wind power), leading to grid power fluctuations, causing voltage fluctuations.
- High-Power Equipment Interference: Frequent starting and stopping of high-power electrical equipment (such as factory motors, welding machines) in the grid connection area. Excessive instantaneous current during startup causes a sudden voltage drop, and sudden voltage rise during shutdown causes frequent and large fluctuations in grid voltage.
- Three-Phase Imbalance: Excessive single-phase load in local areas (such as a large number of single-phase devices used simultaneously) leads to three-phase voltage asymmetry, causing voltage abnormalities.
- Harmonic Interference: Harmonic pollution generated by nonlinear loads in the power grid (such as frequency converters and LED power supplies) leads to voltage distortion and fluctuations.
Transmission-Side Causes (Intermediate Links)
- Excessive Voltage Drop: Excessively long power cables or insufficient wire diameter result in high line impedance, causing a significant voltage drop as the charging current increases. This leads to insufficient actual input voltage at the charging pile, with noticeable fluctuations depending on the load.
- Poor Line Contact: Loose, oxidized, or burnt terminals, or aging circuit breaker contacts, increase contact resistance, causing localized voltage fluctuations or abnormal voltage drops.
- Local Grid Faults: Loose neutral wire connection, phase loss, or damaged transformer tap changer leads to abnormal input voltage.
Internal Causes of the Charging Pile (Equipment Side)
- Internal Hardware Aging/Faults: Aging of internal power devices such as the rectifier bridge, filter capacitors, and step-down inductors, or misalignment of the internal sampling circuit (voltage sampling resistor, operational amplifier), distorts the charging pile’s perception of the input voltage, resulting in false voltage fluctuation reports or triggering protection mechanisms.
- Input Line Protection Device Failure: A breakdown of the surge protector (varistor) on the input side or a damaged power filter can prevent effective filtering of interference from the power grid, amplifying voltage fluctuations.
Environmental and Unexpected Factors
- Lightning Strike or Short Circuit Impact: A sudden high-voltage (surge) impact from a lightning strike or a power grid short circuit can cause instantaneous abnormalities in the input voltage.
- Extreme Environment: Extreme temperatures (high or low) can affect line resistance or equipment performance, thereby indirectly causing voltage fluctuations.

When troubleshooting voltage fluctuations on the charging pile’s input side, it is usually necessary to combine on-site conditions with comprehensive methods such as measuring the input voltage, checking line voltage drop, and testing the charging pile’s internal sampling circuitry for accurate diagnosis.