With carbon peaking across the country and carbon neutrality goals and requirements, sales of new energy-heavy truck electric vehicles will more than double year-on-year in 2024. Faced with the rapid growth of the heavy truck electric vehicle market, there is an obvious shortage of heavy truck charging stations. Although public charging stations will also increase significantly in 2024, they mainly serve small and medium-sized passenger cars and cannot provide good charging services for heavy-duty electric trucks.

Differences between heavy truck charging stations and ordinary charging stations
Different charging power requirements:
Ordinary car charging stations’ common charging power per gun is 60KW or 80KW. Electric heavy trucks generally require a charging power of more than 160KW per gun, and the latest electric heavy trucks require a charging power of 240KW per gun. This is much higher than the power of ordinary car charging piles. If you use ordinary car charging piles to charge electric heavy trucks, the charging time will be greatly increased, which is unacceptable to heavy truck drivers.
Different charging methods:
Ordinary cars have only one fast charging interface, while electric heavy trucks have two fast charging interfaces, which require dual-gun coordinated charging, so the charging pile needs to have a charging power of 320KW-480KW.
Different charging site requirements:
Ordinary car charging stations have small parking spaces and narrow lanes, while heavy truck charging spaces have large lanes that are wide, and there is generally no canopy on the station.
Different location selection of charging stations:
Ordinary car charging stations generally choose areas with prosperous urban areas and heavy traffic. Heavy truck charging stations are generally suitable for construction in logistics parks, freight yards, mines, port terminals, etc.
Different customer acquisition methods:
In addition to acquiring customers by their location, ordinary car charging stations also rely on drainage platforms to acquire customers. In addition to acquiring customers by their location, electric heavy truck charging stations also need to establish long-term cooperative relationships with local heavy truck fleets to make them charging members of this station and bind customers.

Selection of electric heavy truck charging piles
Charging power requirements:
Select suitable charging piles according to the battery capacity and maximum charging power of heavy trucks. At present, the battery capacity of newly launched electric heavy-duty trucks has reached 600kwh, and a few heavy-duty trucks have reached 1000kwh. The maximum charging power is already 360KW for dual guns, and some dual guns can reach up to 480KW.
Charging pile type:
Charging piles are divided into group charging and integrated charging piles. Group charging is also called split charging piles, which are composed of a rectifier cabinet and a terminal. An integrated charging pile is a device that can realize charging services. The advantage of a split charging pile is that it can intelligently distribute power, has higher charging efficiency, and reduces power waste. The advantage of an integrated charging pile is that it is cheaper than a split charging pile under the same power.
Charging pile selection:
The selection of heavy-duty truck charging piles is very important for heavy-duty truck charging station operators because it will affect the investment amount and return on investment of the entire station. However, the selection of heavy-duty truck charging piles is very complicated, because it is closely related to the single capacity of the station’s transformer, the total capacity of the entire station, and the number of charging heavy-duty truck parking spaces.
- Example 1: If a heavy-duty truck charging station requires 6 heavy-duty truck charging spaces, and the available transformers are 2 1000KVA units, then the recommended charging pile type is 6 360KW dual-gun units.
- Example 2: If a heavy-duty truck charging station requires 12 heavy-duty truck charging spaces, and the available transformers are 2 1000KVA units, then the recommended charging pile type is 2 960KW 6-terminal 12-gun group charging units.