How to Choose the Material for Charging Pile Cables?

The distribution of new energy charging piles is becoming increasingly widespread, and they are now ubiquitous in gas stations, parking lots, and residential areas. How should the material of the charging pile cables be chosen?

Cable type selection

The following factors should generally be considered:

  •  Conductivity: Copper has good electrical conductivity.
  • Insulation Performance: Polymer materials (such as polyethylene or polyvinyl chloride) are commonly used in cable insulation layers.
  • Abrasion Resistance and Corrosion Resistance: Silicone rubber, TPE (thermoplastic elastomer)
  • Temperature Range: Some special polymer materials or high-temperature silicone can meet this requirement.
  • Safety: Flame-retardant polymer materials perform well in this regard.

Copper Wire vs. Aluminum Wire

Comparison of Common New Energy Charging Cable Materials

Copper Wire vs. Aluminum Wire:

Copper wire has better conductivity, providing higher transmission efficiency and lower energy loss. Aluminum wire is cheaper than copper wire, but its conductivity is poorer.

PVC Insulation vs. XLPE Insulation:

PVC insulation is inexpensive and commonly used in low-voltage cables, but its insulation performance is relatively poor, and its heat resistance is limited. XLPE insulation (cross-linked polyethylene) has higher insulation performance.

PVC Outer Sheath vs. Polyurethane (PUR) Outer Sheath:

PVC outer sheaths offer better abrasion resistance and water resistance, and are relatively inexpensive. PUR outer sheaths offer better oil resistance, abrasion resistance, and cold resistance.

Silicone Rubber vs. TPE (Thermoplastic Elastomer):

Silicone rubber has high-temperature resistance and remains soft. TPE materials have good abrasion resistance and low-temperature resistance.

How to Choose the Material for Charging Pile Cables

There are two types of cables for charging piles:

  • BV type wires include BVV, BVVB, and BVB wires. These wires have a single-strand thick copper core and are relatively stiff; we collectively refer to them as “stiff wires.” BV type cable stands for copper core PVC insulated wire, meaning it’s a stiff wire.
  • RV-type wires include RVV and RVVP wires. These wires have a multi-strand thin copper core and are relatively soft; we generally refer to them as “soft wires.” RV-type cable stands for copper core PVC-insulated flexible wire/cable, meaning it’s a soft wire.
We most commonly use BV-type wire when installing charging piles.

Typically, household charging piles are 7kW AC charging piles. So, what wire size should we choose?

According to electrical circuit specifications, a 1 square millimeter (mm²) cross-sectional area pure copper wire can withstand a current of 6.5A. A single-phase (220V) appliance draws 4.5A for 1kW. Therefore, a 10 square millimeter wire can handle 65A ÷ 4.5A = 14.4kW.

This means a 10 square millimeter copper wire can power two 7kW AC charging piles. Therefore, a 6 square millimeter wire is sufficient for household charging piles.

Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x