PUD board program update instructions: For those who need to update, please refer to the following steps.
1. Connect the downloader to a USB port on your computer.

2. Run the program “DownLoader_V1.54” in the file.

3. Click “Browse.”

4. Find the PDU motherboard program in the file.

5. Select the chip model “STM32F4XX.”

6. Click the “Options” button and check the two buttons in the image below. Click “OK” when finished.

7. Click “Download.”

8. After the download is complete, connect the downloader to the flash port on the PDU motherboard at your location.

9. You can use a power bank or connect it directly to a laptop’s USB port to power the downloader.

10. Press the left and right buttons simultaneously to enter the main menu. (If you have already selected the correct program, you can skip to step 13.)

11. Press the left and right buttons simultaneously to select F1: File and press the yellow button.

12. In the file menu, use the left and right keys to select “LT_EVPMC 24.00.06.hex”. And then long-press the yellow button back to the menu.

13. Press the yellow button to confirm the program and wait for the display to be successful.

If you need to update your PDU board program, follow the steps above and click as shown in the images. If you have any other questions about charging piles, please feel free to contact us; we will be happy to assist you.