Why did my scheduled charging fail?

Does anyone know why scheduled charging for electric vehicles fails? Charging Schedule Methods: Vehicle-based Schedule or Charging Station Schedule.

Immersion Liquid Cool EV Charger 3

Vehicle-based Schedule

Schedule Steps:

  • The user sets the start time via the vehicle’s screen/owner’s app;
  • After plugging in the charging gun, the customer needs to start the charging station (by swiping a card, using the app, Bluetooth, etc.). The charging station starts running. Because the vehicle-based system is set to start at a fixed time, it won’t respond immediately; it will wait until the set time to close the switch. At this point, the charging station is in a ready state. Note: The charging station needs to confirm parameters and support continuous signal transmission.
  • When the user-set time is reached, the vehicle-based system responds and closes the switch.
  • With the vehicle switch closed (the charging station signal wave is converted to a 6V low-voltage wave), charging begins.

Charging Station Reservation

Reservation Steps:

  • The user sets the start time via the charging station’s app (for smart charging stations);
  • After inserting the charging gun, no further operation is required;
  • Upon reaching the set time, the charging station platform remotely initiates a charging request command, and the charging station starts charging (the charging station begins sending signal waves);
  • The vehicle-side signal switch closes (the charging station signal wave is converted to a 6V low-voltage wave), and charging begins.

Note: Most vehicles have a sleep function and will not be woken up after receiving the signal wave!

The above describes the reservation process for third-party charging stations (non-original equipment manufacturer)

charging pile's emergency stop button

How to troubleshoot?

Confirm the charging reservation method: Vehicle-side reservation or charging station-side reservation?

If it’s a vehicle-side reservation:
  • First, check if the charging station supports scheduled charging
  • After the charging gun starts, is it in a state of voltage but no current? This state should last for more than 10 minutes without the order ending. If the station continues to prepare until the scheduled time but doesn’t start, the problem is that the vehicle’s signal switch hasn’t closed at the appointed time, indicating a vehicle issue.
  • Verify that the customer’s vehicle parameters were successfully sent.
If it’s a charging station-side reservation:
  • Inquire if the vehicle has a sleep mode. If it does, charging station-side reservations are not supported.
  • If the customer indicates the vehicle does not sleep or can be woken up by a signal, check the pile terminal hardware, on-site signals, etc.
Update cookies preferences
WhatsApp

Get a Quick Quote!

x

    Get a Quick Quote!

    x